Binary Or ASCII Data
Binary mode data loads much faster then text, so this is the default. It may be useful to set this to text mode for debugging purposes.
Save Format
For large data runs it may be useful to turn off the save of all volts and currents and only save the signals that are needed to be viewed. This can speed things up considerably. For large circuits, saving all node voltages and currents could result in 100's MB!.
File size can be further reduced by using the space options page and setting the file data type to float, rather than double.
Enable Auto AD
If enabled, analogue to digital and digital interfaces will be automatically inserted at the relevant nodes. It may be desirable to disable this option and add the converters manually on the schematic if higher accuracy is required. This option works in conjunction with the AD voltage setting.
A/D Voltage - Sets the digital output voltage.
D/A Output Resistance - Sets the output resistance of the automatic digital to analog interface.
A/D Input Capacitance - Sets the input capacitance of the automatic analog to digital interface.
See Mixed-Mode for more information.